These are used to hold down the middle and rear bench in a VW bus. I am not sure about early split window models, but do know that these work in the bay windows. The unit is a combination of a t-bolt and hook-type bracket that clamps over the top of the seat rail to hold it in place. There is a small nipple on the underside of the bracket that goes into a hole on the top of the bench rails. The t-bolt slides into a notch in the floor of the bus. Once you have it slid in, you rotate it 90 degrees to help lock it in place. On a side note, the same t-bolts are used for the two rear most bolt down sections of the Westy foldout bed.Pics HERE.
Tag Archive for 'Interior'
Ok, this last week I has been pretty busy and I haven’t had too much time to sit down and post. But for today, I have some pics. These are the hinge covers for the rear hatch on a later model bay window vw bus. These have turned yellow a bit but are still in good shape. If you have the westy cabinet on one side, you wont be able to put this up there. Not enough room. Interestingly, one of the screws that holds the cover to the corner, can be seen through the body of the bus if you look in the cooling vents.Pics HERE.
